MAX4741EKA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4741 |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 100MHz |
| On-State Resistance (Max) | 800mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 32pF 32pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 24ns, 16ns |
| Charge Injection | 28pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -110dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Normal Position | NO |
| Height Seated (Max) | 1.45mm |
| RoHS Status | ROHS3 Compliant |
MAX4741EKA+T Overview
Shipping overseas is convenient due to the electrical component's packing in SOT-23-8. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a ratio of 1:1. The operating temperature is extended to around -40°C~85°C TA. There are 8 terminations totally. A 1 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 1.8V voltage supply. The electrical component body receives 8 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. There are 2 circuits in this multiplexer. Look for analog switch ic variants by searching with MAX4741. In this analog multiplexer, the value is Multiplexer or Switches. Using a single voltage supply, this switch device consumes 1.6V~3.6V volts. In this switch multiplexer, there are SEPARATE OUTPUT outputs available.
MAX4741EKA+T Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 100MHz
MAX4741EKA+T Applications
There are a lot of Maxim Integrated MAX4741EKA+T Analog Switches & Multiplexers ICs applications.
- DSLAMs
- Data Acquisition Systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- SONET
- Audio and video switching
- PDH Multiplexers
- Mechanical reed relay replacement
- Cable Modem
- Access Concentrators
- Fiber In The Loop (FITL)
