Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
800mOhm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
362mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX4742 |
Pin Count |
8 |
Number of Channels |
1 |
Number of Circuits |
2 |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.6V |
Operating Supply Current |
200nA |
Max Supply Current |
200nA |
Throw Configuration |
SPST |
Turn On Delay Time |
24 ns |
Supply Type |
Single |
Turn-Off Delay Time |
16 ns |
-3db Bandwidth |
100MHz |
On-State Resistance (Max) |
800mOhm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
50 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
32pF 32pF |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
24ns, 16ns |
Charge Injection |
28pC |
Channel-to-Channel Matching (ΔRon) |
50m Ω |
Crosstalk |
-110dB @ 1MHz |
Switch-on Time-Max |
35ns |
Voltage - Supply, Single (V+) |
1.6V~3.6V |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
MAX4742EUA+ Overview
This electronic part is conveniently packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 8. The electronic part delivers high-quality output through its 1 channels. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. An electrical component like this is included in the 8 series. SPST - NC switching circuits are used in these analog switch ics. This multiplexer is composed of 2 circuits. Using the MAX4742 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 800mOhm. You can find the functions of the 8 pins in the datasheets. It is generally not recommended to supply a voltage higher than 3.6V to the switch device in normal circumstances. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 1.6V. It would be sufficient to run this analogue multiplexer with 200nA current. A voltage of 1.6V~3.6V is required to drain this analog switch from a single voltage supply. Putting voltage greater than 200nA on the multiplexer may cause damage.
MAX4742EUA+ Features
1 Channels
Switch Circuit: SPST - NC
200nA Supply Current
-3db Bandwidth: 100MHz
MAX4742EUA+ Applications
There are a lot of Maxim Integrated MAX4742EUA+ Analog Switches & Multiplexers ICs applications.
- Isolation
- DVD-R
- Access Concentrators
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Microprocessor controlled systems
- RGB switches
- Digital cross connects (DSX-1)
- Power routing
- 65 V DACs
- Intelligent PBX