MAX4742EUA+T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4742 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 100MHz |
| On-State Resistance (Max) | 800mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 32pF 32pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 24ns, 16ns |
| Charge Injection | 28pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -110dB @ 1MHz |
| Switch-on Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX4742EUA+T Overview
Packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), the electronic component is convenient for shipping overseas. High reliability is ensured by the advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~85°C TA. Total terminations are 8. The electronic part provides high-quality output because it has 1 channels. When a voltage supply of 1.8V is used, the electronic component should be turned on and run. An electrical component of this type can be found in the 8 series. A SPST - NC switching circuit is used for these analog switches. It consists of 2 circuits. Use MAX4742 to search for variants of the digital switches. The voltage required by this switch device is 1.6V~3.6V, draining from a single voltage supply.
MAX4742EUA+T Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 100MHz
MAX4742EUA+T Applications
There are a lot of Maxim Integrated MAX4742EUA+T Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- Multiplexers
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Switching Systems
- Audio and video switching
- MP3 players
- Remote wireless modules
- Relay Replacement
- DSUs
- Microprocessor controlled systems
