MAX4743EKA+T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4743 |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 100MHz |
| On-State Resistance (Max) | 800mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 32pF 32pF |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 24ns, 16ns |
| Charge Injection | 28pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -110dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Height Seated (Max) | 1.45mm |
| RoHS Status | ROHS3 Compliant |
MAX4743EKA+T Overview
Presented in SOT-23-8, this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there have been 8 terminations. By its 1 channels, the electronic component provides high-quality output. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. A total of 8 pins are injected into the body of the electronic part. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. There are 2 circuits in this switch device. MAX4743 can be used to search for analog multiplexer variants. It is a typical Multiplexer or Switches analog multiplexer. Analogue multiplexers require a 1.6V~3.6V voltage to drain from a single voltage supply. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.
MAX4743EKA+T Features
1 Channels
Switch Circuit: SPST - NO/NC
-3db Bandwidth: 100MHz
MAX4743EKA+T Applications
There are a lot of Maxim Integrated MAX4743EKA+T Analog Switches & Multiplexers ICs applications.
- Cable PC
- Wireless Local Loop
- Low-Voltage
- FTTH
- Avionics and Military Systems
- Digital cross connects (DSX-1)
- Power routing
- Cell phones
- Routers
- Cellular phones
