MAX4749EUD+T
| Parameters | |
|---|---|
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 85ns, 45ns |
| Charge Injection | 9pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -84dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 60ns |
| Voltage - Supply, Single (V+) | 2V~11V |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4749 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 11V |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 250MHz |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 20pF 20pF |
| On-state Resistance Match-Nom | 0.2Ohm |
MAX4749EUD+T Overview
Due to its 14-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. There are 14 terminations totally. As a result of its 1 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 3V voltage supply. As part of the design of the 14 series, this electronic part has been incorporated into the system. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. There are 4 circuits in this multiplexer. Use MAX4749 to search for variants of the digital switches. There is Multiplexer or Switches analog multiplexer like this in the world. This analog switch requires a voltage of 2V~11V to drain from a single voltage supply.
MAX4749EUD+T Features
1 Channels
Switch Circuit: SPST - NO/NC
-3db Bandwidth: 250MHz
MAX4749EUD+T Applications
There are a lot of Maxim Integrated MAX4749EUD+T Analog Switches & Multiplexers ICs applications.
- Public switching systems
- Access Concentrators
- Voice over IP/DSL – Integrated Access Devices, Smart
- Intelligent PBX
- Audio and video switching
- DSUs
- Microwave transmission systems
- Cell phones
- Imaging
- Audio signal routing
