MAX474CPA+

80nA 80 dB Instrumentational OP Amps 0.175μA 5V 2.7V~5.25V ±1.35V~2.625V MAX474 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX474CPA+
Package: 8-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 692
Description: 80nA 80 dB Instrumentational OP Amps 0.175μA 5V 2.7V~5.25V ±1.35V~2.625V MAX474 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Lead Free	Lead Free
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Operating Temperature	0°C~70°C
Packaging	Tube
Published	1995
JESD-609 Code	e3
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX474
Pin Count	8
JESD-30 Code	R-PDIP-T8
Qualification Status	Not Qualified
Output Type	Rail-to-Rail
Operating Supply Voltage	5V
Number of Circuits	2
Operating Supply Current	2mA
Nominal Supply Current	6mA
Slew Rate	17V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	80 dB
Current - Input Bias	80nA
Voltage - Supply, Single/Dual (±)	2.7V~5.25V ±1.35V~2.625V
Input Offset Voltage (Vos)	700μV
Gain Bandwidth Product	12MHz
Unity Gain BW-Nom	12000 kHz
Voltage Gain	110dB
Average Bias Current-Max (IIB)	0.175μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	7V
Bias Current-Max (IIB) @25C	0.15μA
Length	9.375mm
RoHS Status	ROHS3 Compliant

MAX474CPA+ Overview

The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. General Purpose-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Tube case. We are approaching the 8h termination of the year. The pins on this board total to 8 in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. As far as the input offset voltage is concerned, linear amplifier rates at 700μV. For this electrical component, Through Hole is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . A supply current of 2mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 110dB. During the manufacturing process, this buffer amplifier is divided into 2 circuits. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The operating supply voltage of the buffer op amp is rated at 5V.