MAX4750EBE+T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-WFBGA, CSPBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4750 |
| Pin Count | 16 |
| JESD-30 Code | S-XBGA-B16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 11V |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 250MHz |
| On-State Resistance (Max) | 25Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 20pF 20pF |
| On-state Resistance Match-Nom | 0.2Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 85ns, 45ns |
| Charge Injection | 9pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -84dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 60ns |
| Voltage - Supply, Single (V+) | 2V~11V |
| Height Seated (Max) | 0.67mm |
| RoHS Status | ROHS3 Compliant |
MAX4750EBE+T Overview
This electronic part is conveniently packaged in 16-WFBGA, CSPBGA, making it easy to ship abroad. The advanced packaging method Tape & Reel (TR) provides high reliability. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 16 terminations. This electronic part offers high-quality output due to its 1 channels. An 3V voltage supply should allow the electrical part to be turned on and run. The electrical component body receives 16 pins. These analog multiplexers are built based on SPDT switching circuits. The multiplexer consists of 2 circuits. Using the MAX4750 search parameter, you can discover variants of the switch. Theswitch device is a typical Multiplexer or Switches. Draining from a single voltage supply, this analog switch requires a voltage of 2V~11V.
MAX4750EBE+T Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 250MHz
MAX4750EBE+T Applications
There are a lot of Maxim Integrated MAX4750EBE+T Analog Switches & Multiplexers ICs applications.
- Residential Gateways, Home Gateway/Router
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Fault Tolerant Systems
- PCMCIA cards
- Automotive applications
- ISDN NT1/TA
- Microprocessor controlled systems
- High reliability control systems
- Industrial
- New designs requiring multiplexer functions
