MAX4751EGE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4751 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | S-CQCC-N16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 250MHz |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 20pF 20pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 85ns, 45ns |
| Charge Injection | 9pC |
| Channel-to-Channel Matching (ΔRon) | 30m Ω |
| Crosstalk | -84dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 35ns |
| Switch-off Time-Max | 25ns |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Normal Position | NO |
| Height Seated (Max) | 1mm |
| RoHS Status | ROHS3 Compliant |
MAX4751EGE+T Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-VFQFN Exposed Pad. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Increasing operating temperature to around -40°C~85°C TA. A total of 16 terminations have been recorded. A electrical component with 1 channels is capable of high-quality output. An 1.8V voltage supply should allow the electrical part to be turned on and run. As part of its design, the 16 series is equipped with this electronic component. Unlike digital switches, these are based on SPST - NO switching circuits. The circuits in this analogue multiplexer number 4. Using the MAX4751 search parameter, you can discover variants of the switch. This switch device is a typical Multiplexer or Switches. A voltage of 1.6V~3.6V is required to drain this analog switch from a single voltage supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.
MAX4751EGE+T Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 250MHz
MAX4751EGE+T Applications
There are a lot of Maxim Integrated MAX4751EGE+T Analog Switches & Multiplexers ICs applications.
- Microprocessor Controlled Analog Systems
- PBXs
- E1 Multiplexer
- Cable Modem
- Precision instrumentation
- Medical systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Remote Powered Equipment
- Sample hold systems
- Intelligent PBX
