MAX4751EUD+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4751 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 250MHz |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 20pF 20pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 85ns, 45ns |
| Charge Injection | 9pC |
| Channel-to-Channel Matching (ΔRon) | 30m Ω |
| Crosstalk | -84dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 35ns |
| Switch-off Time-Max | 25ns |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Normal Position | NO |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
MAX4751EUD+T Overview
The electronic component is convenient to ship overseas because it is packed in a 14-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. 14 terminations have been made so far. As a result of its 1 channels, this electronic component provides high-quality output. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. The electronic part body is injected with 14 pins. Multiplexers built on a SPST - NO switching circuit are built. A total of 4 circuits make up this switch device. Look for analog switch ic variants by searching with MAX4751. There is Multiplexer or Switches analog multiplexer like this in the world. An analogue multiplexer drains from a single voltage supply at 1.6V~3.6V. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer.
MAX4751EUD+T Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 250MHz
MAX4751EUD+T Applications
There are a lot of Maxim Integrated MAX4751EUD+T Analog Switches & Multiplexers ICs applications.
- High reliability control systems
- E1 Multiplexer
- Remote Powered Equipment
- PBXs
- PBX interfaces
- PCMCIA cards
- Ultrasound
- MP3 players
- Medical Instrumentation
- DSUs
