MAX4752EGE+
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4752 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | S-CQCC-N16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 2.5nA |
| Channel Capacitance (CS(off), CD(off)) | 31pF 30pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 30ns, 25ns |
| Charge Injection | 21pC |
| Channel-to-Channel Matching (ΔRon) | 30m Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 35ns |
| Switch-off Time-Max | 25ns |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Normal Position | NC |
| Height Seated (Max) | 1mm |
| RoHS Status | ROHS3 Compliant |
MAX4752EGE+ Overview
Shipping overseas is convenient with the electronic component packed in 16-VFQFN Exposed Pad. High reliability is achieved by using advanced packaging method Tube. The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 16 terminations. The electronic part delivers high-quality output through its 1 channels. With a 1.8V voltage supply, the electrical component should be turned on and run. It is part of the design of the 16 series that this electronic component is included. SPST - NO switching circuits are used in these analog switch ics. A total of 4 circuits make up this switch device. Use MAX4752 to search for variants of the digital switches. There is a standard Multiplexer or Switches analogue multiplexer here. This analog switch requires a voltage of 1.6V~3.6V to drain from a single voltage supply. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.
MAX4752EGE+ Features
1 Channels
Switch Circuit: SPST - NO
MAX4752EGE+ Applications
There are a lot of Maxim Integrated MAX4752EGE+ Analog Switches & Multiplexers ICs applications.
- Avionics test equipment
- Ultrasound
- USB 1.1 signal switching circuits
- Sample hold systems
- Channel Banks
- High-Voltage
- T1/E1 Terminals
- Sample-and-hold systems
- HDTV
- Precision data acquisition
