MAX4753EGE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 900mOhm |
| Terminal Finish | TIN |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.349W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX4753 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 1μA |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 35 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 25 ns |
| On-State Resistance (Max) | 900mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 2.5nA |
| Channel Capacitance (CS(off), CD(off)) | 31pF 30pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 30ns, 25ns |
| Charge Injection | 21pC |
| Channel-to-Channel Matching (ΔRon) | 30m Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Height Seated (Max) | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4753EGE+T Overview
Shipping overseas is convenient with the electronic component packed in 16-VFQFN Exposed Pad. This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. 16 terminations have been made so far. This electronic part offers high-quality output due to its 1 channels. It is safe to turn on and run the electronic component with a 1.8V voltage supply. Into the electrical component body are injected 16 pins. Unlike digital switches, these are based on SPST - NO/NC switching circuits. This multiplexer is composed of 4 circuits. If you are looking for variants of the digital switch, trying search with MAX4753. A 900mOhm internal resistance characterizes this multiplexer. For functions related to 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 3.6V. An effective Single supply digital multiplexer. The lowest voltage the electronic part should receive is 1.6V. For this digital switch to work, 1μA current would suffice. This analogue multiplexer requires a voltage of 1.6V~3.6V when it drains from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 1μA. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. The electronic component can function from 3V.
MAX4753EGE+T Features
1 Channels
Switch Circuit: SPST - NO/NC
1μA Supply Current
MAX4753EGE+T Applications
There are a lot of Maxim Integrated MAX4753EGE+T Analog Switches & Multiplexers ICs applications.
- Video signal routing
- MP3 players
- Fiber In The Loop (FITL)
- DSUs
- Switching Systems
- SONET
- High-Voltage
- PBXs
- Imaging
- High speed data transmission line cards
