MAX4754EBE+T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-WFBGA, CSPBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4754 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | S-XBGA-B16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 10MHz |
| On-State Resistance (Max) | 850mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 4nA |
| Channel Capacitance (CS(off), CD(off)) | 180pF 300pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 140ns, 50ns |
| Charge Injection | 300pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 50ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 0.67mm |
| Length | 2.02mm |
| RoHS Status | ROHS3 Compliant |
MAX4754EBE+T Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-WFBGA, CSPBGA. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Operational temperature extended around -40°C~85°C TA. A total of 16 terminations have been recorded. A 1 channel electronic part produces high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. The electrical component body receives 16 pins. Unlike digital switches, these are based on SPDT switching circuits. There are 4 circuits in this multiplexer. Search with MAX4754 if you are looking for analog multiplexer variants. In this analog multiplexer, the value is Multiplexer or Switches. This analogue multiplexer requires a voltage of 1.8V~5.5V when it drains from a single voltage supply. A total of SEPARATE OUTPUT outputs are available on this analog switch ic.
MAX4754EBE+T Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 10MHz
MAX4754EBE+T Applications
There are a lot of Maxim Integrated MAX4754EBE+T Analog Switches & Multiplexers ICs applications.
- Audio signal routing
- Industrial and process control systems
- DVD-R
- USB 1.1 signal switching circuits
- FTTH
- Multiplexers
- Avionics and Military Systems
- MP3 players
- Access Concentrators
- Cable Modem
