MAX4760ETX+

140ns, 50ns DPDT 3.5Ohm QUAD Analog Switches BREAK-BEFORE-MAKE MAX4760 36 Pins 5nA 3V 36-WFQFN Exposed Pad

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4760ETX+
Package: 36-WFQFN Exposed Pad
Datasheet: PDF
Stock: 111
Description: 140ns, 50ns DPDT 3.5Ohm QUAD Analog Switches BREAK-BEFORE-MAKE MAX4760 36 Pins 5nA 3V 36-WFQFN Exposed Pad(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	36-WFQFN Exposed Pad
Number of Pins	36
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	36
ECCN Code	EAR99
Resistance	3.5Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	2.105W
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	3V
Terminal Pitch	0.5mm
Base Part Number	MAX4760
Pin Count	36
Operating Supply Voltage	5V
Polarity	Non-Inverting
Number of Channels	2
Number of Circuits	4
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	10nA
Nominal Supply Current	12μA
Max Supply Current	1μA
Turn On Delay Time	800 ns
Supply Type	Single
Bandwidth	150MHz
Turn-Off Delay Time	800 ns
On-State Resistance (Max)	3.5Ohm
High Level Output Current	100mA
Multiplexer/Demultiplexer Circuit	2:2
Off-state Isolation-Nom	100 dB
Current - Leakage (IS(off)) (Max)	5nA
Channel Capacitance (CS(off), CD(off))	25pF
On-state Resistance Match-Nom	0.2Ohm
Switch Circuit	DPDT
Switch Time (Ton, Toff) (Max)	140ns, 50ns
Charge Injection	15pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-95dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	50ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Height	750μm
Length	6.1mm
Width	6.1mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant

MAX4760ETX+ Overview

As the electronic part is packed in 36-WFQFN Exposed Pad, international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Surface Mount is where this multiplexer is located. There is 2:2 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. The total number of terminations is 36. A 2 channel electronic part produces high-quality output. Powered by a 3V voltage supply, the electrical part should be switched on and run. Into the electrical component body are injected 36 pins. On the other hand, analog switches can be constructed using DPDT switching circuits. 4 circuits are used in this analogue multiplexer. Using the MAX4760 search parameter, you can discover variants of the switch. A 3.5Ohm internal resistance characterizes this multiplexer. To find out what the 36 pins do, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. A analog switch ic that has a cost-effective Single supply type. A low voltage of 1.8V should be applied to the electronic component. This digital switch can be operated with a current of 10nA. Draining from a single voltage supply, this analog switch requires a voltage of 1.8V~5.5V. It may damage the digital multiplexer if the voltage is higher than 1μA. 5V operating voltages can be used with this electrical part. In 150MHz-bandwidths, data can be transferred.