MAX4760ETX+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 36-WFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4760 |
| Output | SEPARATE OUTPUT |
| Pin Count | 36 |
| JESD-30 Code | S-XQCC-N36 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Number of Circuits | 4 |
| -3db Bandwidth | 150MHz |
| On-State Resistance (Max) | 3.5Ohm |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 25pF |
| On-state Resistance Match-Nom | 0.2Ohm |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 140ns, 50ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -95dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 60ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 0.8mm |
| Length | 6mm |
| RoHS Status | ROHS3 Compliant |
MAX4760ETX+T Overview
Due to its 36-WFQFN Exposed Pad packaging, the electronic part is convenient for international shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 2:2. Around -40°C~85°C TA is the extended operating temperature. In total, 36 terminations have occurred. High-quality output is provided by the electronic component's 2 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. Into the electrical component body are injected 36 pins. Circuits based on DPDT switching are used to construct these analog switch ics. A 4 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with MAX4760. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage of 1.8V~5.5V is required for this switch device, which drains from a single voltage source. This analog switch ic utilizes SEPARATE OUTPUT output.
MAX4760ETX+T Features
2 Channels
Switch Circuit: DPDT
-3db Bandwidth: 150MHz
MAX4760ETX+T Applications
There are a lot of Maxim Integrated MAX4760ETX+T Analog Switches & Multiplexers ICs applications.
- ISDN NT1/TA
- Industrial
- Relay replacements
- Sample hold systems
- FTTH
- Avionics test equipment
- Video switching
- Low-Voltage
- Central office
- Optical Applications
