MAX4761EWX+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 36-WFBGA, CSPBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| Resistance | 3.5Ohm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 36 |
| JESD-30 Code | S-PBGA-B36 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Number of Circuits | 8 |
| Analog IC - Other Type | DPDT |
| -3db Bandwidth | 150MHz |
| On-State Resistance (Max) | 3.5Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 100 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 25pF |
| On-state Resistance Match-Nom | 0.2Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 140ns, 50ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -95dB @ 100kHz |
| Switch-on Time-Max | 140ns |
| Switch-off Time-Max | 50ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 0.67mm |
| Length | 3.06mm |
| RoHS Status | ROHS3 Compliant |
MAX4761EWX+T Overview
The electrical component comes in 36-WFBGA, CSPBGA packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. 2:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. The total number of terminations is 36. A electrical component with 2 channels is capable of high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. As part of its design, the 36 series is equipped with this electronic component. A SPDT switching circuit is used to build these analog multiplexers. There are 8 circuits in this multiplexer. An switch multiplexer with 3.5Ohm internal resistance has a value of 3.5Ohm. Analogue multiplexers require a 1.8V~5.5V voltage to drain from a single voltage supply. A DPDT analog IC is integrated into the board.
MAX4761EWX+T Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 150MHz
MAX4761EWX+T Applications
There are a lot of Maxim Integrated MAX4761EWX+T Analog Switches & Multiplexers ICs applications.
- SONET
- Channel Banks
- ISDN NT1/TA
- Data Acquisition Systems
- Precision data acquisition
- Remote wireless modules
- PBXs
- High speed data transmission line cards
- Relay replacements
- Routers
