Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
16-WFQFN Exposed Pad |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2011 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
TIN |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX4780 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
1.8/3V |
Number of Channels |
2 |
Number of Circuits |
4 |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Supply Current-Max (Isup) |
0.002mA |
-3db Bandwidth |
123MHz |
On-State Resistance (Max) |
1Ohm |
Multiplexer/Demultiplexer Circuit |
2:1 |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
33pF 60pF |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
25ns, 10ns |
Charge Injection |
5pC |
Channel-to-Channel Matching (ΔRon) |
100m Ω |
Crosstalk |
-95dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
30ns |
Switch-off Time-Max |
15ns |
Voltage - Supply, Single (V+) |
1.6V~4.2V |
Signal Current-Max |
0.3A |
Height Seated (Max) |
0.8mm |
Length |
3mm |
RoHS Status |
ROHS3 Compliant |
MAX4780ETE+ Overview
Shipping overseas is convenient due to the electrical component's packing in 16-WFQFN Exposed Pad. High reliability is provided by advanced packaging method Tube. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 2:1. Around -40°C~85°C TA is the extended operating temperature. The total number of terminations is 16. High-quality output is provided by the electronic component's 2 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. There are 16 pins injected into the electronic part body. A SPDT switching circuit is used to build these analog multiplexers. A 4 circuit is present in this switch device. Use MAX4780 to search for variants of the digital switches. You can find the functions of the 16 pins in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Draining from a single voltage supply, this analog switch requires a voltage of 1.6V~4.2V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs.
MAX4780ETE+ Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 123MHz
MAX4780ETE+ Applications
There are a lot of Maxim Integrated MAX4780ETE+ Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- Industrial and process control systems
- PBX interfaces
- E1 Multiplexer
- T1/E1 Terminals
- PDH Multiplexers
- Avionics
- Data switching
- Remote Powered Equipment
- Voice over IP/DSL – Integrated Access Devices, Smart