MAX4780EUE+T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 1Ohm |
| Terminal Finish | MATTE TIN |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 755mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX4780 |
| Pin Count | 16 |
| Operating Supply Voltage | 3V |
| Number of Channels | 2 |
| Number of Circuits | 4 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.6V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 2μA |
| Turn On Delay Time | 30 ns |
| Bandwidth | 123MHz |
| Supply Current-Max (Isup) | 0.002mA |
| Turn-Off Delay Time | 15 ns |
| On-State Resistance (Max) | 1Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 33pF 60pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 25ns, 10ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -95dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.6V~4.2V |
| Signal Current-Max | 0.3A |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4780EUE+T Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 2:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. Total terminations are 16. The electronic part provides high-quality output because it has 2 channels. It is safe to turn on and run the electronic component with a 1.8V voltage supply. It is injected into the electrical part body with 16 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. Circuits number 4 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with MAX4780. The internal resistance of this digital multiplexer is 1Ohm. For functions related to 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. There should be 1.6V voltage fed to the electrical part below 1.6V. The switch device would be able to operate with 2μA current. The voltage required by this switch device is 1.6V~4.2V, draining from a single voltage supply. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. There is a voltage range of 3V operating voltages for the electrical part. This switch operates within the bandwidth of 123MHz.
MAX4780EUE+T Features
2 Channels
Switch Circuit: SPDT
2μA Supply Current
Bandwidth: 123MHz
MAX4780EUE+T Applications
There are a lot of Maxim Integrated MAX4780EUE+T Analog Switches & Multiplexers ICs applications.
- Medical systems
- Communications systems
- Precision data acquisition
- Ultrasound
- Multiplexers
- Access Concentrators
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- DSLAMs
- Private Branch Exchange (PBX)
- Microprocessor controlled systems
