MAX4781EUE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4781 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| On-State Resistance (Max) | 1Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 38pF 310pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Time (Ton, Toff) (Max) | 25ns, 15ns |
| Charge Injection | -110pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 30ns |
| Switch-off Time-Max | 20ns |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MAX4781EUE+ Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tube is used. In Surface Mount, you'll find this switch device. There is 8:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 16 terminations. The electronic part provides high-quality output because it has 8 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. 16 pins are injected to the electronic part body. 1 circuits are used in this analogue multiplexer. Look for analog switch ic variants by searching with MAX4781. To find out what the functions of 16 pins are, please refer to their datasheets. It is a typical Multiplexer or Switches analog multiplexer. This analog switch requires a voltage of 1.6V~3.6V to drain from a single voltage supply. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER.
MAX4781EUE+ Features
8 Channels
MAX4781EUE+ Applications
There are a lot of Maxim Integrated MAX4781EUE+ Analog Switches & Multiplexers ICs applications.
- Video switching
- New designs requiring multiplexer functions
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- E1 Multiplexer
- Battery-powered systems
- SDH
- DSUs
- Industrial and process control systems
- Channel Banks
- Communication systems
