MAX4782ETE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4782 |
| Pin Count | 16 |
| JESD-30 Code | S-XQCC-N16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3.3V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Supply Current-Max (Isup) | 0.001mA |
| On-State Resistance (Max) | 1Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 38pF 158pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 25ns, 15ns |
| Charge Injection | -110pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Signal Current-Max | 0.01A |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX4782ETE+ Overview
As the electronic part is packed in 16-WFQFN Exposed Pad, international shipping is convenient. High reliability is ensured by the advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 16. A electrical component with 4 channels is capable of high-quality output. A 1.8V voltage supply should turn on and run the electronic component. A key feature of the 16 series is the inclusion of this electronic part as part of its design. On the other hand, analog switches can be constructed using SP4T switching circuits. It consists of 2 circuits. MAX4782 can be used to search for analog multiplexer variants. Multiplexer or Switches is a typical switch device. Using only a single voltage supply, this analog switch requires 1.6V~3.6V voltage. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module.
MAX4782ETE+ Features
4 Channels
Switch Circuit: SP4T
MAX4782ETE+ Applications
There are a lot of Maxim Integrated MAX4782ETE+ Analog Switches & Multiplexers ICs applications.
- Precision instrumentation
- Isolation
- Transmit
- Public switching systems
- Cable Modem
- SONET
- HDTV
- Medical systems
- Communication systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
