MAX4782EUE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4782 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3.3V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Supply Current-Max (Isup) | 0.001mA |
| On-State Resistance (Max) | 1Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 38pF 158pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 25ns, 15ns |
| Charge Injection | -110pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Signal Current-Max | 0.01A |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MAX4782EUE+ Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 16 terminations. A electrical component with 4 channels is capable of high-quality output. When the electronic component is given a voltage of 1.8V, it should be turned on and run. The electronic part body is injected with 16 pins. Unlike digital switches, these are based on SP4T switching circuits. There are 2 circuits in this multiplexer. Using the MAX4782 search parameter, you can discover variants of the switch. For functions related to 16 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. A voltage of 1.6V~3.6V is required for this switch device, which drains from a single voltage source. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board.
MAX4782EUE+ Features
4 Channels
Switch Circuit: SP4T
MAX4782EUE+ Applications
There are a lot of Maxim Integrated MAX4782EUE+ Analog Switches & Multiplexers ICs applications.
- Cable Modem
- Access Concentrators
- Private Branch Exchange (PBX)
- T1/E1 Terminals
- Relay replacements
- Multi-Line E1 Interface Cards
- Microprocessor Controlled Analog Systems
- MP3 players
- High reliability control systems
- Automatic test equipment
