MAX4784EGE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4784 |
| Pin Count | 16 |
| JESD-30 Code | S-CQCC-N16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3V |
| Number of Channels | 2 |
| Number of Circuits | 4 |
| Operating Supply Current | 2μA |
| Throw Configuration | DPST |
| Logic Function | Multiplexer |
| Supply Type | Single |
| -3db Bandwidth | 123MHz |
| On-State Resistance (Max) | 1Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 33pF 60pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 25ns, 10ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -95dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 30ns |
| Switch-off Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 1.6V~4.2V |
| Signal Current-Max | 0.15A |
| Height Seated (Max) | 1mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4784EGE Overview
Shipping overseas is convenient due to the electrical component's packing in 16-VQFN Exposed Pad. Advanced packaging method Tube is used to provide high reliability. It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Around -40°C~85°C TA is the extended operating temperature. There are 16 terminations totally. This electronic part offers high-quality output due to its 2 channels. A 1.8V voltage supply should turn on and run the electronic component. Electronic part bodies are injected with 16 pins. SPDT switching circuits are used in these analog switch ics. There are 4 circuits in this multiplexer. Search with MAX4784 if you are looking for analog multiplexer variants. In this multiplexer, the internal resistance is 1Ohm. Analogue multiplexer with a Single supply type that is cost-effective. In order to operate this switch device, it would need a current of 2μA. Using only a single voltage supply, this analog switch requires 1.6V~4.2V voltage.
MAX4784EGE Features
2 Channels
Switch Circuit: SPDT
2μA Supply Current
-3db Bandwidth: 123MHz
MAX4784EGE Applications
There are a lot of Maxim Integrated MAX4784EGE Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- Video switching
- E1 Network Equipment
- DSUs
- Data Acquisition Systems
- Switching Systems
- Microwave transmission systems
- PBXs
- Industrial control systems
- Battery-powered systems
