Parameters |
Channel-to-Channel Matching (ΔRon) |
100m Ω |
Crosstalk |
-95dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Voltage - Supply, Single (V+) |
1.6V~4.2V |
Signal Current-Max |
0.15A |
Height Seated (Max) |
0.8mm |
Length |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-WFQFN Exposed Pad |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
1Ohm |
Terminal Finish |
Matte Tin (Sn) |
Max Power Dissipation |
1.1765W |
Technology |
CMOS |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX4784 |
Pin Count |
16 |
JESD-30 Code |
S-XQCC-N16 |
Operating Supply Voltage |
3V |
Number of Channels |
2 |
Number of Circuits |
4 |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.6V |
Operating Supply Current |
2μA |
Turn On Delay Time |
30 ns |
Logic Function |
Multiplexer |
Supply Type |
Single |
Bandwidth |
123MHz |
Supply Current-Max (Isup) |
0.002mA |
Turn-Off Delay Time |
15 ns |
On-State Resistance (Max) |
1Ohm |
Multiplexer/Demultiplexer Circuit |
2:1 |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
33pF 60pF |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
25ns, 10ns |
Charge Injection |
5pC |
MAX4784ETE+T Overview
The electrical component comes in 16-WFQFN Exposed Pad packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operation at a temperature around -40°C~85°C TA. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 2 channels. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Unlike digital switches, these are based on SPDT switching circuits. Circuits number 4 make up this analogue multiplexer. Look for analog switch ic variants by searching with MAX4784. Internally, this switch multiplexer has a resistance of 1Ohm. Multiplexers should not be powered above 3.6V in normal situations. A cost-effective Single supply type analogue multiplexer. It is recommended to use 1.6V as the lowest voltage for the electrical part. In order to operate this switch device, it would need a current of 2μA. A voltage of 1.6V~4.2V is required for this switch device, which drains from a single voltage source. 3V operating voltages are supported by the electronic component. A 123MHz-bandwidth can be used for data transfer.
MAX4784ETE+T Features
2 Channels
Switch Circuit: SPDT
2μA Supply Current
Bandwidth: 123MHz
MAX4784ETE+T Applications
There are a lot of Maxim Integrated MAX4784ETE+T Analog Switches & Multiplexers ICs applications.
- High-Voltage
- Avionics test equipment
- Wireless Local Loop
- Battery Powered Systems
- Intelligent PBX
- Communication systems
- Automatic test equipment
- Audio and video switching
- Digital access cross connects
- Sample-and-hold systems