MAX4800CQI+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 48Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.818W |
| Technology | BCDMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX4800 |
| Pin Count | 28 |
| Operating Supply Voltage | 100V |
| Power Supplies | 3/13V |
| Number of Channels | 1 |
| Number of Circuits | 8 |
| Nominal Supply Current | 2mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 5 μs |
| Supply Type | Single |
| Turn-Off Delay Time | 5 μs |
| Max Dual Supply Voltage | 185V |
| On-State Resistance (Max) | 38Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 77 dB |
| Current - Leakage (IS(off)) (Max) | 4μA |
| Channel Capacitance (CS(off), CD(off)) | 18pF |
| On-state Resistance Match-Nom | 1.3Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 5μs, 5μs |
| Charge Injection | 820pC |
| Channel-to-Channel Matching (ΔRon) | 1.9 Ω |
| Crosstalk | -80dB @ 5MHz |
| Switch-on Time-Max | 5000ns |
| Switch-off Time-Max | 5000ns |
| Voltage - Supply, Single (V+) | 2.7V~13.2V |
| Normal Position | NO |
| Height Seated (Max) | 4.57mm |
| Length | 11.505mm |
| Width | 11.505mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4800CQI+T Overview
The electronic component is convenient to ship overseas because it is packed in a 28-LCC (J-Lead). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. It is mounted in the position Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Temperatures around 0°C~70°C TA are extended for operation. Totally, there are 28 terminations. The electronic part provides high-quality output because it has 1 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. Into the electrical component body are injected 28 pins. A SPST - NO switching circuit is used to build these analog multiplexers. 8 circuits are used in this analogue multiplexer. Using the MAX4800 search parameter, you can discover variants of the switch. It has an internal resistance of 48Ohm. For details about the functions of 28 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Analogue multiplexer with a Single supply type that is cost-effective. Draining from a single voltage supply, this analog switch requires a voltage of 2.7V~13.2V. If put voltage greater than 185V on the multiplexer, damage may be caused to the device. The electrical part can be operated at 100V voltage levels.
MAX4800CQI+T Features
1 Channels
Switch Circuit: SPST - NO
MAX4800CQI+T Applications
There are a lot of Maxim Integrated MAX4800CQI+T Analog Switches & Multiplexers ICs applications.
- Cell phones
- Audio and video routing
- Video signal routing
- Intelligent PBX
- Public switching systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- Medical
- Access Concentrators
- Private Branch Exchange (PBX)
- Low-Voltage
