MAX4800CTM+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-WFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Resistance | 48Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.818W |
| Technology | BCDMOS |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.4mm |
| Base Part Number | MAX4800 |
| Pin Count | 48 |
| Power Supplies | 3/13V |
| Number of Channels | 1 |
| Number of Circuits | 8 |
| Nominal Supply Current | 2mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 5 μs |
| Supply Type | Single |
| Turn-Off Delay Time | 5 μs |
| Max Dual Supply Voltage | 185V |
| On-State Resistance (Max) | 38Ohm |
| Min Dual Supply Voltage | 40V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 77 dB |
| Current - Leakage (IS(off)) (Max) | 4μA |
| Channel Capacitance (CS(off), CD(off)) | 18pF |
| On-state Resistance Match-Nom | 1.3Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 5μs, 5μs |
| Charge Injection | 820pC |
| Channel-to-Channel Matching (ΔRon) | 1.9 Ω |
| Crosstalk | -80dB @ 5MHz |
| Switch-on Time-Max | 5000ns |
| Switch-off Time-Max | 5000ns |
| Voltage - Supply, Single (V+) | 2.7V~13.2V |
| Normal Position | NO |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4800CTM+T Overview
The electronic component is convenient to ship overseas because it is packed in a 48-WFQFN Exposed Pad. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Operation at a temperature around 0°C~70°C TA. The total number of terminations is 48. A high-quality output is provided by the electrical component's 1 channels. When a voltage supply of 3V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 48 pins. A SPST - NO switching circuit is used for these analog switches. There are 8 circuits in this multiplexer. Try searching for the analog switch ic with MAX4800 if you are looking for variants. This digital multiplexer has 48Ohm internal resistance. The functions of 48 pins can be found in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Digital switch that provides Single power at a cost-effective price. An analogue multiplexer drains from a single voltage supply at 2.7V~13.2V. Despite this switch's dual supply capability, its voltage should not exceed 185V. In the case of dual power supplies, you should connect at least 40V.
MAX4800CTM+T Features
1 Channels
Switch Circuit: SPST - NO
MAX4800CTM+T Applications
There are a lot of Maxim Integrated MAX4800CTM+T Analog Switches & Multiplexers ICs applications.
- Fiber In The Loop (FITL)
- Avionics test equipment
- SONET/SDH ADM
- Multiplexers
- SDH
- Optical Applications
- Precision data acquisition
- Avionics
- Battery-powered systems
- Intelligent PBX
