MAX4800CXZ+
| Parameters | |
|---|---|
| Throw Configuration | SPST |
| Turn On Delay Time | 5 μs |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 5 μs |
| Max Dual Supply Voltage | 185V |
| On-State Resistance (Max) | 38Ohm |
| Min Dual Supply Voltage | 40V |
| Dual Supply Voltage | 100V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 77 dB |
| Current - Leakage (IS(off)) (Max) | 4μA |
| Channel Capacitance (CS(off), CD(off)) | 18pF |
| On-state Resistance Match-Nom | 1.3Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 5μs, 5μs |
| Charge Injection | 820pC |
| Channel-to-Channel Matching (ΔRon) | 1.9 Ω |
| Crosstalk | -80dB @ 5MHz |
| Switch-on Time-Max | 5000ns |
| Switch-off Time-Max | 5000ns |
| Voltage - Supply, Single (V+) | 2.7V~13.2V |
| Normal Position | NO |
| Height Seated (Max) | 1.32mm |
| Length | 6mm |
| Width | 5.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 26-LFBGA, CSBGA |
| Number of Pins | 26 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 26 |
| ECCN Code | EAR99 |
| Resistance | 48Ohm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.818W |
| Technology | BCDMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4800 |
| Pin Count | 26 |
| Power Supplies | 3/13V |
| Number of Channels | 1 |
| Number of Circuits | 8 |
| Nominal Supply Current | 2mA |
MAX4800CXZ+ Overview
The electronic component is convenient to ship overseas because it is packed in a 26-LFBGA, CSBGA. Advanced packaging method Tube is used to provide high reliability. It is mounted in the position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around 0°C~70°C TA. 26 terminations have been made so far. A 1 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 3V voltage supply. This electrical component is included in the 26 series of products. Multiplexers built on a SPST - NO switching circuit are built. This multiplexer is composed of 8 circuits. Try searching with MAX4800 if you're looking for variants. There is 48Ohm internal resistance in this digital multiplexer. For functions related to 26 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. The digital multiplexer has a low cost Dual, Single supply. This analogue multiplexer requires a voltage of 2.7V~13.2V when it drains from a single voltage supply. If put voltage greater than 185V on the multiplexer, damage may be caused to the device. In the case of dual power supplies, you should connect at least 40V.
MAX4800CXZ+ Features
1 Channels
Switch Circuit: SPST - NO
MAX4800CXZ+ Applications
There are a lot of Maxim Integrated MAX4800CXZ+ Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- SONET/SDH ADM
- Communication systems
- Digital Cross-Connects
- Cable PC
- SDH
- Microprocessor controlled systems
- Avionics test equipment
- DVD-R
- Battery-powered systems
