MAX4800CXZ+T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 26-LFBGA, CSBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 26 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Multiplexer or Switches |
| Technology | BCDMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4800 |
| Pin Count | 26 |
| JESD-30 Code | R-PBGA-B26 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 13.2V |
| Power Supplies | 3/13V |
| Number of Channels | 1 |
| Number of Circuits | 8 |
| On-State Resistance (Max) | 38Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 77 dB |
| Current - Leakage (IS(off)) (Max) | 4μA |
| Channel Capacitance (CS(off), CD(off)) | 18pF |
| On-state Resistance Match-Nom | 1.3Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 5μs, 5μs |
| Charge Injection | 820pC |
| Channel-to-Channel Matching (ΔRon) | 1.9 Ω |
| Crosstalk | -80dB @ 5MHz |
| Switch-on Time-Max | 5000ns |
| Switch-off Time-Max | 5000ns |
| Voltage - Supply, Single (V+) | 2.7V~13.2V |
| Normal Position | NO |
| Height Seated (Max) | 1.32mm |
| Length | 6mm |
| Width | 5.35mm |
| RoHS Status | ROHS3 Compliant |
MAX4800CXZ+T Overview
Shipping overseas is convenient due to the electrical component's packing in 26-LFBGA, CSBGA. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. 1:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around 0°C~70°C TA. There are 26 terminations totally. A electrical component with 1 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 3V voltage supply. The electronic part body is injected with 26 pins. SPST - NO switching circuits are used in these analog switch ics. There are 8 circuits in this multiplexer. Try searching for MAX4800 variants of the analog switch ic. The analogue multiplexer in this example is a typical Multiplexer or Switches. This analogue multiplexer requires a voltage of 2.7V~13.2V when it drains from a single voltage supply.
MAX4800CXZ+T Features
1 Channels
Switch Circuit: SPST - NO
MAX4800CXZ+T Applications
There are a lot of Maxim Integrated MAX4800CXZ+T Analog Switches & Multiplexers ICs applications.
- Voice over IP/DSL – Integrated Access Devices, Smart
- Video switching
- PBXs
- Microprocessor controlled systems
- MP3 players
- Channelized and Unchannelized DS3 applications
- Remote Powered Equipment
- Intelligent PBX
- ATM
- Sample-and-hold systems
