MAX4801CQI+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Resistance | 38Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 842mW |
| Technology | BCDMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX4801 |
| Pin Count | 28 |
| Operating Supply Voltage | 12V |
| Power Supplies | 3/13V |
| Number of Channels | 1 |
| Number of Circuits | 8 |
| Max Supply Voltage | 13.2V |
| Min Supply Voltage | 2.7V |
| Throw Configuration | SPST |
| Turn On Delay Time | 5 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 5 ns |
| On-State Resistance (Max) | 38Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 77 dB |
| Current - Leakage (IS(off)) (Max) | 4μA |
| Channel Capacitance (CS(off), CD(off)) | 18pF |
| On-state Resistance Match-Nom | 7.6Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 5μs, 5μs |
| Charge Injection | 820pC |
| Channel-to-Channel Matching (ΔRon) | 1.9 Ω |
| Crosstalk | -80dB @ 5MHz |
| Switch-on Time-Max | 5000ns |
| Switch-off Time-Max | 5000ns |
| Voltage - Supply, Single (V+) | 2.7V~13.2V |
| Normal Position | NO |
| Height Seated (Max) | 4.57mm |
| Length | 11.505mm |
| Width | 11.505mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4801CQI+ Overview
Shipping overseas is convenient with the electronic component packed in 28-LCC (J-Lead). High reliability is ensured by the advanced packaging method Tube. The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. The operating temperature is extended to around -40°C~85°C TA. In total, there have been 28 terminations. A electrical component with 1 channels is capable of high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. There is an electrical component included in the 28 series. Multiplexers built on a SPST - NO switching circuit are built. This multiplexer is composed of 8 circuits. Use MAX4801 to search for variants of the digital switches. This digital multiplexer has 38Ohm internal resistance. For details about the functions of 28 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 13.2V volts for the multiplexer. A cost-effective Single supply type analogue multiplexer. A low voltage of 2.7V should be applied to the electronic component. The voltage required by this switch device is 2.7V~13.2V, draining from a single voltage supply. This electrical part is compatible with 12V operating voltages.
MAX4801CQI+ Features
1 Channels
Switch Circuit: SPST - NO
MAX4801CQI+ Applications
There are a lot of Maxim Integrated MAX4801CQI+ Analog Switches & Multiplexers ICs applications.
- PBX interfaces
- DVD-R
- Residential Gateways, Home Gateway/Router
- New designs requiring multiplexer functions
- Central office
- Multi-Line E1 Interface Cards
- Audio/video switches
- Low-Voltage
- SONET
- Intelligent PBX
