MAX4802ACXZ+
| Parameters | |
|---|---|
| Throw Configuration | SPST |
| Turn On Delay Time | 5 μs |
| Supply Type | Single |
| Turn-Off Delay Time | 5 μs |
| On-State Resistance (Max) | 38Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 33 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 18pF |
| On-state Resistance Match-Nom | 1.9Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 5μs, 5μs |
| Channel-to-Channel Matching (ΔRon) | 1.9 Ω |
| Crosstalk | -80dB @ 5MHz |
| Switch-on Time-Max | 5000ns |
| Switch-off Time-Max | 5000ns |
| Voltage - Supply, Single (V+) | 2.7V~6V |
| Normal Position | NO |
| Height Seated (Max) | 1.32mm |
| Length | 6mm |
| Width | 5.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 26-LFBGA, CSBGA |
| Number of Pins | 26 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2011 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 48Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.818W |
| Technology | BCDMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX4802 |
| Output | SEPARATE OUTPUT |
| Pin Count | 28 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 8 |
| Max Supply Voltage | 200V |
| Min Supply Voltage | 40V |
| Nominal Supply Current | 2mA |
MAX4802ACXZ+ Overview
Presented in 26-LFBGA, CSBGA, this electrical component is convenient for overseas shipping. The advanced packaging method Tray provides high reliability. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operating temperature extended to 0°C~70°C TA. There are 28 terminations totally. Due to its 1 channels, the electrical component produces high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 28 pins. These analog multiplexers are built based on SPST - NO switching circuits. The multiplexer consists of 8 circuits. Try searching for MAX4802 variants of the analog switch ic. Analog switches have 48Ohm internal resistance. To find out what the functions of 26 pins are, please refer to their datasheets. It is a typical Multiplexer or Switches analog multiplexer. A voltage higher than 200V should not normally be supplied to the switches. A cost-effective Single supply type analogue multiplexer. 40V is the lowest voltage that should be fed to the electronic electronic part. The voltage required by this switch device is 2.7V~6V, draining from a single voltage supply. The analog switch ic utilizes SEPARATE OUTPUT outputs in total.
MAX4802ACXZ+ Features
1 Channels
Switch Circuit: SPST - NO
MAX4802ACXZ+ Applications
There are a lot of Maxim Integrated MAX4802ACXZ+ Analog Switches & Multiplexers ICs applications.
- Sample-and-hold systems
- PBXs
- Remote Powered Equipment
- Switching Systems
- HDTV
- Optical Applications
- Automotive applications
- Battery Powered Instruments
- Public switching systems
- RGB switches
