MAX4802CCM+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Resistance | 48Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.818W |
| Technology | BCDMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX4802 |
| Pin Count | 48 |
| Operating Supply Voltage | 100V |
| Power Supplies | 3/13V |
| Number of Channels | 1 |
| Number of Circuits | 8 |
| Nominal Supply Current | 2mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 5 μs |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 5 μs |
| Max Dual Supply Voltage | 185V |
| On-State Resistance (Max) | 38Ohm |
| Dual Supply Voltage | 100V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 77 dB |
| Current - Leakage (IS(off)) (Max) | 4μA |
| Channel Capacitance (CS(off), CD(off)) | 18pF |
| On-state Resistance Match-Nom | 7.6Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 5μs, 5μs |
| Charge Injection | 820pC |
| Channel-to-Channel Matching (ΔRon) | 1.9 Ω |
| Crosstalk | -80dB @ 5MHz |
| Switch-on Time-Max | 5000ns |
| Switch-off Time-Max | 5000ns |
| Voltage - Supply, Single (V+) | 2.7V~13.2V |
| Normal Position | NO |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4802CCM+ Overview
Packed in 48-LQFP, the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature extended to 0°C~70°C TA. In total, there have been 48 terminations. As a result of its 1 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. The electronic part body is injected with 48 pins. Unlike digital switches, these are based on SPST - NO switching circuits. A total of 8 circuits make up this switch device. Try searching with MAX4802 if you're looking for variants. An switch multiplexer with 48Ohm internal resistance has a value of 48Ohm. Please refer to the datasheets for 48 pins functions. It is a typical Multiplexer or Switches analog multiplexer. Analog switch ics with Dual, Single supply type are cost-effective. Using a single voltage supply, this switch device consumes 2.7V~13.2V volts. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 185V. The electronic component can function from 100V.
MAX4802CCM+ Features
1 Channels
Switch Circuit: SPST - NO
MAX4802CCM+ Applications
There are a lot of Maxim Integrated MAX4802CCM+ Analog Switches & Multiplexers ICs applications.
- Routers
- PBXs
- High reliability control systems
- Audio signal routing
- Cable PC
- Channel Banks
- Audio and video routing
- DSUs
- MP3 players
- Private Branch Exchange (PBX)
