MAX4802CCM+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Resistance | 48Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.818W |
| Technology | BCDMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX4802 |
| Pin Count | 48 |
| Power Supplies | 3/13V |
| Number of Channels | 1 |
| Number of Circuits | 8 |
| Nominal Supply Current | 2mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 5 μs |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 5 μs |
| Max Dual Supply Voltage | 185V |
| On-State Resistance (Max) | 38Ohm |
| Min Dual Supply Voltage | 40V |
| Dual Supply Voltage | 100V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 77 dB |
| Current - Leakage (IS(off)) (Max) | 4μA |
| Channel Capacitance (CS(off), CD(off)) | 18pF |
| On-state Resistance Match-Nom | 7.6Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 5μs, 5μs |
| Charge Injection | 820pC |
| Channel-to-Channel Matching (ΔRon) | 1.9 Ω |
| Crosstalk | -80dB @ 5MHz |
| Switch-on Time-Max | 5000ns |
| Switch-off Time-Max | 5000ns |
| Voltage - Supply, Single (V+) | 2.7V~13.2V |
| Normal Position | NO |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4802CCM+T Overview
As the electronic part is packed in 48-LQFP, international shipping is convenient. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature around 0°C~70°C TA extended. In total, 48 terminations have occurred. Due to its 1 channels, the electrical component produces high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 48 pins. A SPST - NO switching circuit is used to build these analog multiplexers. A 8 circuit is present in this switch device. Try searching with MAX4802 to find analog multiplexer variants. There is 48Ohm internal resistance in this digital multiplexer. Datasheets for functions of 48 pins are available. A analogue multiplexer of this type is a Multiplexer or Switches. Analog switch ics with Dual, Single supply type are cost-effective. This analog switch requires a voltage of 2.7V~13.2V to drain from a single voltage supply. For this switch, a dual supply voltage is feasible, but it must not exceed 185VWith dual power supplies, you should attach at least 40V.
MAX4802CCM+T Features
1 Channels
Switch Circuit: SPST - NO
MAX4802CCM+T Applications
There are a lot of Maxim Integrated MAX4802CCM+T Analog Switches & Multiplexers ICs applications.
- DSUs
- Sample hold systems
- Industrial and process control systems
- Routers
- HDTV
- Central office
- Cable PC
- Frame Relay Equipment
- Audio/video switches
- Battery Powered Instruments
