MAX4802CQI+
| Parameters | |
|---|---|
| Channel Capacitance (CS(off), CD(off)) | 18pF |
| On-state Resistance Match-Nom | 7.6Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 5μs, 5μs |
| Charge Injection | 820pC |
| Channel-to-Channel Matching (ΔRon) | 1.9 Ω |
| Crosstalk | -80dB @ 5MHz |
| Switch-on Time-Max | 5000ns |
| Switch-off Time-Max | 5000ns |
| Voltage - Supply, Single (V+) | 2.7V~13.2V |
| Normal Position | NO |
| Height Seated (Max) | 4.57mm |
| Length | 11.505mm |
| Width | 11.505mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 48Ohm |
| Terminal Finish | MATTE TIN |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 842mW |
| Technology | BCDMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX4802 |
| Pin Count | 28 |
| Operating Supply Voltage | 13.2V |
| Power Supplies | 3/13V |
| Number of Channels | 1 |
| Number of Circuits | 8 |
| Nominal Supply Current | 4mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 5 μs |
| Supply Type | Single |
| Turn-Off Delay Time | 5 μs |
| Max Dual Supply Voltage | 185V |
| On-State Resistance (Max) | 38Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 77 dB |
| Current - Leakage (IS(off)) (Max) | 4μA |
MAX4802CQI+ Overview
The electronic component is convenient to ship overseas because it is packed in a 28-LCC (J-Lead). In order to provide high reliability, an advanced packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. There is 1:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around 0°C~70°C TA. Total terminations are 28. High-quality output is provided by the electronic component's 1 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. It is injected into the electrical part body with 28 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. There are 8 circuits in this switch device. If you are looking for variants of the digital switch, trying search with MAX4802. Analog switches have 48Ohm internal resistance. Datasheets for 28 pin functions are available upon request. Multiplexer or Switches is a typical switch device. The digital multiplexer has a low cost Single supply. Draining from a single voltage supply, this analog switch requires a voltage of 2.7V~13.2V. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 185V. This electrical part is compatible with 13.2V operating voltages.
MAX4802CQI+ Features
1 Channels
Switch Circuit: SPST - NO
MAX4802CQI+ Applications
There are a lot of Maxim Integrated MAX4802CQI+ Analog Switches & Multiplexers ICs applications.
- Industrial and process control systems
- High-Voltage
- Industrial control systems
- Communication systems
- Communication systems
- Precision instrumentation
- Optical Applications
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Digital access cross connects
- Automotive applications
