MAX4802CTM+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-WFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Resistance | 48Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.818W |
| Technology | BCDMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.4mm |
| Base Part Number | MAX4802 |
| Pin Count | 48 |
| Power Supplies | 3/13V |
| Number of Channels | 1 |
| Number of Circuits | 8 |
| Nominal Supply Current | 2mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 5 μs |
| Supply Type | Single |
| Turn-Off Delay Time | 5 μs |
| Max Dual Supply Voltage | 185V |
| On-State Resistance (Max) | 38Ohm |
| Min Dual Supply Voltage | 40V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 77 dB |
| Current - Leakage (IS(off)) (Max) | 4μA |
| Channel Capacitance (CS(off), CD(off)) | 18pF |
| On-state Resistance Match-Nom | 7.6Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 5μs, 5μs |
| Charge Injection | 820pC |
| Channel-to-Channel Matching (ΔRon) | 1.9 Ω |
| Crosstalk | -80dB @ 5MHz |
| Switch-on Time-Max | 5000ns |
| Switch-off Time-Max | 5000ns |
| Voltage - Supply, Single (V+) | 2.7V~13.2V |
| Normal Position | NO |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4802CTM+ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 48-WFQFN Exposed Pad. In order to provide high reliability, an advanced packaging method Tube is used. The multiplexer is located in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around 0°C~70°C TA. 48 terminations have been made so far. This electronic part offers high-quality output due to its 1 channels. When the electronic component is given a voltage of 3V, it should be turned on and run. A key feature of the 48 series is the inclusion of this electronic part as part of its design. A SPST - NO switching circuit is used for these analog switches. There are 8 circuits in this switch device. Use MAX4802 to search for variants of the digital switches. There is 48Ohm internal resistance in this digital multiplexer. The functions of 48 pins can be found in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Single supply type digital switch with a low cost. Using a single voltage supply, this switch device consumes 2.7V~13.2V volts. Despite this switch's dual supply capability, its voltage should not exceed 185V. You should attach at least 40V voltage if you are using dual power supply.
MAX4802CTM+ Features
1 Channels
Switch Circuit: SPST - NO
MAX4802CTM+ Applications
There are a lot of Maxim Integrated MAX4802CTM+ Analog Switches & Multiplexers ICs applications.
- Public switching systems
- Battery-powered systems
- SONET/SDH ADM
- Audio/video switches
- Microprocessor controlled systems
- Relay Replacement
- High-Voltage
- Audio and video routing
- Data switching
- DSUs
