MAX4802CXZ+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 26-LFBGA, CSBGA |
| Number of Pins | 26 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 26 |
| ECCN Code | EAR99 |
| Resistance | 48Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.818W |
| Technology | BCDMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4802 |
| Pin Count | 26 |
| Power Supplies | 3/13V |
| Number of Channels | 1 |
| Number of Circuits | 8 |
| Nominal Supply Current | 2mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 5 μs |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 5 μs |
| Max Dual Supply Voltage | 185V |
| On-State Resistance (Max) | 38Ohm |
| Min Dual Supply Voltage | 40V |
| Dual Supply Voltage | 100V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 77 dB |
| Current - Leakage (IS(off)) (Max) | 4μA |
| Channel Capacitance (CS(off), CD(off)) | 18pF |
| On-state Resistance Match-Nom | 7.6Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 5μs, 5μs |
| Charge Injection | 820pC |
| Channel-to-Channel Matching (ΔRon) | 1.9 Ω |
| Crosstalk | -80dB @ 5MHz |
| Switch-on Time-Max | 5000ns |
| Switch-off Time-Max | 5000ns |
| Voltage - Supply, Single (V+) | 2.7V~13.2V |
| Normal Position | NO |
| Height Seated (Max) | 1.32mm |
| Length | 6mm |
| Width | 5.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4802CXZ+ Overview
The electrical component comes in 26-LFBGA, CSBGA packaging, which makes it convenient to ship overseas. The advanced packaging method Tube provides high reliability. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around 0°C~70°C TA. In total, 26 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. Powered by a 3V voltage supply, the electrical part should be switched on and run. An electrical component of this type can be found in the 26 series. Circuits based on SPST - NO switching are used to construct these analog switch ics. The multiplexer consists of 8 circuits. Use MAX4802 to search for variants of the digital switches. In this multiplexer, the internal resistance is 48Ohm. To find out what the 26 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Analog switch ics with Dual, Single supply type are cost-effective. Using a single voltage supply, this switch device consumes 2.7V~13.2V volts. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 185V. When using dual power supplies, you should attach at least 40V.
MAX4802CXZ+ Features
1 Channels
Switch Circuit: SPST - NO
MAX4802CXZ+ Applications
There are a lot of Maxim Integrated MAX4802CXZ+ Analog Switches & Multiplexers ICs applications.
- PDAs
- Modems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Video switching
- Fiber to the Home
- Avionics test equipment
- Relay Replacement
- MP3 players
- USB 1.1 signal switching circuits
- Battery Powered Instruments
