MAX4802CXZ+T
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 26-LFBGA, CSBGA |
| Number of Pins | 26 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 26 |
| ECCN Code | EAR99 |
| Resistance | 48Ohm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.818W |
| Technology | BCDMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4802 |
| Pin Count | 26 |
| Power Supplies | 3/13V |
| Number of Channels | 1 |
| Number of Circuits | 8 |
| Nominal Supply Current | 2mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 5 μs |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 5 μs |
| Max Dual Supply Voltage | 185V |
| On-State Resistance (Max) | 38Ohm |
| Min Dual Supply Voltage | 40V |
| Dual Supply Voltage | 100V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 77 dB |
| Current - Leakage (IS(off)) (Max) | 4μA |
| Channel Capacitance (CS(off), CD(off)) | 18pF |
| On-state Resistance Match-Nom | 7.6Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 5μs, 5μs |
| Charge Injection | 820pC |
| Channel-to-Channel Matching (ΔRon) | 1.9 Ω |
| Crosstalk | -80dB @ 5MHz |
| Switch-on Time-Max | 5000ns |
| Switch-off Time-Max | 5000ns |
| Voltage - Supply, Single (V+) | 2.7V~13.2V |
| Normal Position | NO |
| Height Seated (Max) | 1.32mm |
| Length | 6mm |
| Width | 5.35mm |
| Radiation Hardening | No |
MAX4802CXZ+T Overview
As the electronic part is packed in 26-LFBGA, CSBGA, international shipping is convenient. High reliability is provided by advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Extended operating temperature around 0°C~70°C TA. A total of 26 terminations have been recorded. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. Into the electrical component body are injected 26 pins. Circuits based on SPST - NO switching are used to construct these analog switch ics. Circuits number 8 make up this analogue multiplexer. Use MAX4802 to search for variants of the digital switches. Analog switches have 48Ohm internal resistance. For details about the functions of 26 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. The analog switch ic is of the Dual, Single supply type and is cost-effective. A voltage of 2.7V~13.2V is required to drain this analog switch from a single voltage supply. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 185V. A dual power supply should have at least 40V voltage attached.
MAX4802CXZ+T Features
1 Channels
Switch Circuit: SPST - NO
MAX4802CXZ+T Applications
There are a lot of Maxim Integrated MAX4802CXZ+T Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Signal routing between systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Industrial control systems
- Audio/video switches
- Digital cross connects (DSX-1)
- Digital access cross connects
- Multi-Line E1 Interface Cards
- Isolation
- Video signal routing
