MAX481CSA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX481 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 0.9mA |
| Data Rate | 2.5Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 70mV |
| Receive Delay-Max | 200 ns |
| Transmit Delay-Max | 60 ns |
| Output Low Current-Max | 0.004A |
| Out Swing-Min | 1.5 V |
| High Level Input Current-Max | 0.001A |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX481CSA+T Overview
Due to the enhanced 8-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.There is a Tape & Reel (TR) package for this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.On any Surface Mount-type PCB or development board, you can install this wide receiver.It takes 4.75V~5.25V from the power supply to run this differential driver.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.An operating voltage range of 5V is suitable for this line driver ic.This integrated circuit has 8 terminations designed for driving and receiving signals from data.This transceiver is packaged with 8 market standard pinoutsSince the base part number MAX481 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.An enhanced power dissipation driver IC with 8 pins.There is a capability of 1-bit resolution with this ic receiver.In the case of this receiver, a resolution of 1 bits is typically specified.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.It is recommended that enough current be supplied to the VCC pin of the ic receiver, but not more than 0.9mA.
MAX481CSA+T Features
Tape & Reel (TR) package
8 pin count
8 pins
5V power supply
MAX481CSA+T Applications
There are a lot of Maxim Integrated MAX481CSA+T Drivers/Receivers/Transceivers applications.
- Vehicle
- Sensor reporting
- Wireless HD Photography
- Wireless projection application for conferences
- Aircraft navigation
- Satellite ground stations
- transmission relay
- Clock radio
- Desktop radio
- Bar, KTV wireless entertainment
