MAX4820ETP+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 2Ohm |
| Terminal Finish | TIN |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.35W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX4820 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 150mA |
| Operating Supply Voltage | 5V |
| Interface | SPI |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.3V |
| Nominal Supply Current | 70μA |
| Output Configuration | Low Side |
| Output Current | 70mA |
| Switch Type | Relay, Solenoid Driver |
| Output Current per Channel | 70mA |
| Rise Time | 200ns |
| Fall Time (Typ) | 200 ns |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 2.3V~5.5V |
| Driver Number of Bits | 8 |
| Turn On Time | 1 μs |
| Rds On (Typ) | 2 Ω |
| Turn Off Time | 1 μs |
| Built-in Protections | TRANSIENT |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4820ETP+T Overview
The package is in the form of a Tape & Reel (TR).There is a package for it in the 20-WFQFN Exposed Pad package.It has been mounted as Surface Mount on the LED driver.The switch type is Relay, Solenoid Driver.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.There is a default setting of 8 for output.It produces a maximum output voltage of N-Channel volts at its maximum output.This object belongs to the MAX4820 family.A total of 20 terminations can be found in it.For operation, we use the 20 pins.There are 1 functions of the LED driver.The maximum output current drops to 150mA in order to meet the operation criteria.Supply voltages of 3.3V allow for high efficiency.The lighting driver is mounted in the way of Surface Mount.In total, it has 20 pins.2Ohm resistance is present in the lighting driver.In this case, the output current is set to 70mA.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The supply voltage should be set at 5V for best efficiency.5.5VV is the maximum supply voltage it can handle.You can also run it at 2.3V volts if required.
MAX4820ETP+T Features
Supplied from 3.3V
Resistance of 2Ohm
MAX4820ETP+T Applications
There are a lot of Maxim Integrated MAX4820ETP+T Power Switches ICs applications.
- USB3.1 Power Delivery
- PC Cards
- Various applications equipped with buttons
- Wireless Modem Data Cards
- Solid-State Drives
- Hard Disk Drives
- USB Protection
- PDAs
- Wireless/Networking Cards
- Notebook PC
