MAX4823ETP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4823 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | SPI |
| Output Configuration | Low Side |
| Output Current | 70mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 2.3V~5.5V |
| Turn On Time | 1 µs |
| Rds On (Typ) | 2.7 Ω |
| Turn Off Time | 3 µs |
| Built-in Protections | THERMAL |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
MAX4823ETP+ Overview
It's?packaged?in?the way?of?a?Tube.In the 20-WFQFN Exposed Pad package, it is included.The mounting type of the LED driver is Surface Mount.It owns Relay, Solenoid Driver switch type.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.There are 8 outputs available on this lighting driver.Operation is based on Not Required supply voltage.It has a maximum output voltage of N-Channel volts.The MAX4823 family consists of this type.In total, there are 20 terminations.The operation is performed through the 20 pins.The LED driving board has a total of 8 functions.Supply voltages of 3.6V allow for high efficiency.A total of 20 pins are included in this LED driver.The output current is set to 70mA in this case.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 2.7V.
MAX4823ETP+ Features
Supplied from 3.6V
MAX4823ETP+ Applications
There are a lot of Maxim Integrated MAX4823ETP+ Power Switches ICs applications.
- USB Protection
- Gaming
- Portable Devices
- HDD, SSD
- PC Card Hot Swap
- Wireless Headsets
- Solid-State Drives
- Wireless/Networking Cards
- Portable Music Players
- Low Voltage I/O System Power
