MAX4825ETP+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 2.7Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.35W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX4825 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 150mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | Parallel |
| Nominal Supply Current | 160μA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Output Current per Channel | 70mA |
| Rise Time | 2μs |
| Fall Time (Typ) | 2 μs |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 2.3V~5.5V |
| Driver Number of Bits | 8 |
| Turn On Time | 1 µs |
| Rds On (Typ) | 2.7 Ω |
| Turn Off Time | 3 µs |
| Built-in Protections | THERMAL |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4825ETP+T Overview
It is packaged in the form of a Tape & Reel (TR).Package 20-WFQFN Exposed Pad contains it.The lighting driver is mounted in the Surface Mount position.Relay, Solenoid Driver is the switch type it owns.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.In this LED driver, there are no outputs available.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of N-Channel volts on this LED driver.It comes under the family of MAX4825.The termination count is 20.It is necessary to use the 20 pins in order to operate the LED driver.Currently, the lighting driver has a total of 8 functions.Maximum output current falls to 150mA when operation criteria are met.It is possible to achieve a high level of efficiency with a supply voltage of 2.7V.Surface Mount is mounted in the way of this LED driving board.As a result, it has a total of 20 pins.In this LED driving board, there is 2.7Ohm resistance.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 2.3V.It has a power supply of 3/5V.
MAX4825ETP+T Features
Supplied from 2.7V
Resistance of 2.7Ohm
MAX4825ETP+T Applications
There are a lot of Maxim Integrated MAX4825ETP+T Power Switches ICs applications.
- Portable GPS Device
- Wireless Headsets
- Solid State Drivers
- Portable Video Game Players
- Wireless Modem Data Cards
- Low Voltage I/O System Power
- Notebook and Tablet Computers
- Solid-State Drives
- Portable GPS
- Smartphone and PDA
