MAX4854HETE+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 9Ohm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 1.667W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX4854 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Nominal Supply Current | 10μA |
| Max Supply Current | 20μA |
| Throw Configuration | SPDT |
| Turn On Delay Time | 60 ns |
| Data Rate | 12 Mbps |
| Supply Type | Single |
| Turn-Off Delay Time | 40 ns |
| -3db Bandwidth | 150MHz |
| On-State Resistance (Max) | 9Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 12pF |
| On-state Resistance Match-Nom | 0.2Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 60ns, 40ns |
| Charge Injection | 8pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -95dB @ 1MHz |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4854HETE+T Overview
As the electronic part is packed in 16-WFQFN Exposed Pad, international shipping is convenient. High reliability is provided by advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 1:1. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 16 terminations. A electrical component with 1 channels is capable of high-quality output. A 3V voltage supply should turn on and run the electronic component. The electrical component body receives 16 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. The multiplexer consists of 4 circuits. Search with MAX4854 if you are looking for analog multiplexer variants. Analog switches have 9Ohm internal resistance. Datasheets for functions of 16 pins are available. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Digital switch that provides Single power at a cost-effective price. There should be 2V voltage fed to the electrical part below 2V. This analog switch requires a voltage of 2V~5.5V to drain from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 20μA. This electrical part is compatible with 5V operating voltages.
MAX4854HETE+T Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 150MHz
MAX4854HETE+T Applications
There are a lot of Maxim Integrated MAX4854HETE+T Analog Switches & Multiplexers ICs applications.
- Microwave transmission systems
- PBXs
- Precision test equipment
- DSUs
- PBX interfaces
- Relay Replacement
- Transmit
- Channel Banks
- HDTV
- PCMCIA cards
