MAX485ESA+
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX485 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 500μA |
| Data Rate | 2.5Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 70mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 200 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 60 ns |
| Output Low Current-Max | 0.004A |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 506.605978mg |
MAX485ESA+ Overview
LED drivers benefit from this IC's enhanced 8-SOIC (0.154, 3.90mm Width) package.The Tube package contains this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.Any Surface Mount-type PCB or development board can be used with this wide receiver.Power supply requirements for this differential driver are 4.75V~5.25V.Up to 1/1 receivers/drivers can be installed simultaneously on this electronic part.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.Wide receiver can operate within the range of 5V supply voltages efficiently.Wide receiver has 8 terminations built in for driving or receiving signals from data.This transceiver is packaged with 8 market standard pinoutsMAX485 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.Wide receiver with enhanced power dissipation control, 8-pin.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.There are typically 1 bits of resolution specified in the specifications of this receiver.An input voltage supply of 5V is required to operate the transceiver module.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.IC5V is a high performance driver IC designed to work with a 5V power supply.The module isolated transceiver implements a total of 1 transceivers.Input voltage is set to a value of 500μA, and this integrating circuit is capable of driving LEDs with that voltage.
MAX485ESA+ Features
Tube package
8 pin count
8 pins
5V power supply
MAX485ESA+ Applications
There are a lot of Maxim Integrated MAX485ESA+ Drivers/Receivers/Transceivers applications.
- Changeing the frequency from IF to RF
- Wireless HD Photography
- High-speed computer links
- Aircraft navigation
- Laser diode bonding
- Wireless 3D game
- Tuner
- Point-to-point networking
- Single to Multimode Fiber Conversion
- Pocket PC
