MAX485ESA
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX485 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 0.9mA |
| Data Rate | 2.5Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 70mV |
| Interface Standard | EIA-422; EIA-485 |
| Receive Delay-Max | 200 ns |
| Transmit Delay-Max | 60 ns |
| Output Low Current-Max | 0.004A |
| Out Swing-Min | 1.5 V |
| High Level Input Current-Max | 0.001A |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX485ESA Overview
This driver chip is excellent for driving common LEDs due to its enhanced 8-SOIC (0.154, 3.90mm Width) package.The package of this receiver is Tube.The Transceiver can transceiver type enables this part to be used in a wide range of applications.On any Surface Mount-type PCB or development board, this wide receiver can be placed.Power supply requirements for this differential driver are 4.75V~5.25V.This electronic part can have?up to 1/1 eligible receivers/drivers on the field at once.?IC receiver is designed for applications with a temperature of -40°C~85°C.5V is the supply voltage range that this line driver ic can efficiently operate with.This wide receiver has 8 terminations for driving and receiving data signals.This transceiver is packaged with 8 market standard pinoutsYou can search with MAX485 to get more variants of this part, since it identifies the product type, temperature, package, etc.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.In most cases, the receiver will be specified with a 1-bit resolution.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.IC5V is a high performance driver IC designed to work with a 5V power supply.In addition, the optical transceiver module's 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER function improves signal management accuracy and stability overall.To power the ic receiver, sufficient current but not more than 0.9mA should be supplied to its VCC pin.
MAX485ESA Features
Tube package
8 pin count
5V power supply
MAX485ESA Applications
There are a lot of Maxim Integrated MAX485ESA Drivers/Receivers/Transceivers applications.
- Fiber optic cable connection network
- Fiber-to-the-desktop
- Structural bonding
- WDM transmission
- Wireless network systems
- Datacom networking applications
- Satellite communications networks
- Precision geodetic measurement
- Indoor ad hoc meeting
- Thermal management
