MAX487CSA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX487 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Supply Current-Max | 0.4mA |
| Data Rate | 250kbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 70mV |
| Receive Delay-Max | 2000 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 2000 ns |
| Output Low Current-Max | 0.004A |
| Number of Receivers | 1 |
| High Level Input Current-Max | 0.00025A |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX487CSA+ Overview
This LED driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package for driving common LEDs.The Tube package contains this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.It takes 4.75V~5.25V from the power supply to run this differential driver.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.This line driver ic can operate efficiently with a supply voltage range of 5V.Wide receiver has 8 terminations built in for driving or receiving signals from data.Transceiver comes with 8 standard pinouts that meet the market's requirements.Since the part number MAX487 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.An enhanced power dissipation driver IC with 8 pins.Using this ic receiver, you were able to achieve a resolution of 1 bits.There is a subcategory called Line Driver or Receivers for this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.The module isolated transceiver contains 1 receivers.It is recommended that enough current be supplied to the VCC pin of the ic receiver, but not more than 0.4mA.
MAX487CSA+ Features
Tube package
8 pin count
8 pins
5V power supply
MAX487CSA+ Applications
There are a lot of Maxim Integrated MAX487CSA+ Drivers/Receivers/Transceivers applications.
- Bar, KTV wireless entertainment
- Low power, low voltage systems
- Wireless projection application for conferences
- Remote controls
- Wireless 3D game
- Satellite ground stations
- Notebook
- Optical sub-assembly (OSA)
- Fiber optic cable connection network
- Wireless interactive experience
