MAX487CUA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX487 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 0.4mA |
| Data Rate | 250kbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 70mV |
| Receive Delay-Max | 2000 ns |
| Transmit Delay-Max | 2000 ns |
| Output Low Current-Max | 0.004A |
| Out Swing-Min | 1.5 V |
| High Level Input Current-Max | 0.00025A |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX487CUA+ Overview
Driver ICs with enhanced 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packages are excellent for driving LEDs with common characteristics.In this package, the receiver is mounted in the Tube format.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.A Surface Mount-type PCB or development board can be used to place this wide receiver.Power supply for this differential driver is 4.75V~5.25V.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.This line driver ic can operate efficiently with a supply voltage range of 5V.The integrated terminations of this wide receiver allow it to drive and receive signals from data.ICs that are packaged with market standard pinouts are available on the market.Since the base part number MAX487 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.8-pin driver chip with enhanced power dissipation.This ic receiver provided a 1-bit resolution capability. There is usually a 1-bit resolution specified for this receiver when it is used.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.The optical transceiver module's VCC pin should receive enough input current, but not more than 0.4mA.
MAX487CUA+ Features
Tube package
8 pin count
8 pins
5V power supply
MAX487CUA+ Applications
There are a lot of Maxim Integrated MAX487CUA+ Drivers/Receivers/Transceivers applications.
- Switching system
- Precision geodetic measurement
- Desktop PC
- Wireless access points
- Remote controls
- Laser diode bonding
- Servers
- Wireless multimedia center in smart home
- Changeing the frequency from IF to RF
- Datacom networking applications
