MAX487ECPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX487 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 0.4mA |
| Data Rate | 250kbps |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 70mV |
| Receive Delay-Max | 2000 ns |
| Transmit Delay-Max | 2000 ns |
| Output Low Current-Max | 0.004A |
| Out Swing-Min | 1.5 V |
| High Level Input Current-Max | 0.000002A |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX487ECPA+ Overview
LED drivers benefit from this IC's enhanced 8-DIP (0.300, 7.62mm) package.The Tube package contains this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.A Through Hole-type PCB or development board can be used to place this wide receiver.A differential driver like this uses 4.75V~5.25V of power.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.The operating temperature of this ic receiver is 0°C~70°C. It is primarily designed for applications with low temperatures.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.Wide receiver has 8 terminations built in for driving or receiving signals from data.A package consisting of 8 market standard pinouts is provided with this integrated circuit.The base part number MAX487 identifies the product type, temperature, package, etc., so you can search for more variants by using it.A 8-pin driver IC with enhanced power dissipation control is featured here.An important feature of this ic receiver was its 1-bit resolution capability.This receiver is typically specified with a resolution of 1 bits. This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.The driver IC in this product is designed so that it can be powered by 5V.To power the ic receiver, sufficient current but not more than 0.4mA should be supplied to its VCC pin.
MAX487ECPA+ Features
Tube package
8 pin count
8 pins
5V power supply
MAX487ECPA+ Applications
There are a lot of Maxim Integrated MAX487ECPA+ Drivers/Receivers/Transceivers applications.
- Wireless projection application for conferences
- Fast Ethernet
- Wireless HD Photography
- Single fiber bidirectional application
- Wireless showroom
- Fiber optic cable connection network
- Structural bonding
- Tuner
- Transmission stations
- Cordless telephone
