MAX487ECSA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX487 |
| Pin Count | 8 |
| Output Voltage | 12.5V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 400μA |
| Propagation Delay | 250 ns |
| Data Rate | 250kbps |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 70mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 2000 ns |
| Transmit Delay-Max | 2000 ns |
| Output Low Current-Max | 0.004A |
| High Level Input Current-Max | 0.000002A |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX487ECSA+T Overview
LED drivers with the enhanced 8-SOIC (0.154, 3.90mm Width) package will be able to drive a variety of common LEDs with ease.The receiver is packaged in a Tape & Reel (TR) package.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.A differential driver like this uses 4.75V~5.25V of power.At any given time, there can be up to 1/1 eligible receivers/drivers for this electronic part.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.In this package, you will find 8 market-standard pinouts for this transceiver.With the part number MAX487 identifying the product type, temperature, package, etc., you can search with it to see more variants.It is a 8-pin driver IC with enhanced power dissipation controls.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.This ic receiver provided a 1-bit resolution capability. It is typical for this receiver to have a resolution of 1 bits when it is specified.This transceiver module is designed to operate from an input voltage supply of 5V.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.In total, there are 1 transceivers implemented by this module isolated transceiver.A voltage of 12.5V can be delivered by Wide receiver.
MAX487ECSA+T Features
Tape & Reel (TR) package
8 pin count
8 pins
5V power supply
MAX487ECSA+T Applications
There are a lot of Maxim Integrated MAX487ECSA+T Drivers/Receivers/Transceivers applications.
- interconnection between switches
- Metro access rings
- Low power, low voltage systems
- Single to Multimode Fiber Conversion
- Wireless network systems
- Remote controls
- High-speed computer links
- Home theater wiring-free
- AV receiver
- Cell phones
