MAX487EEPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX487 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 0.4mA |
| Data Rate | 250kbps |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 70mV |
| Receive Delay-Max | 2000 ns |
| Transmit Delay-Max | 2000 ns |
| Output Low Current-Max | 0.004A |
| Out Swing-Min | 1.5 V |
| High Level Input Current-Max | 0.000002A |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX487EEPA+ Overview
With the enhanced 8-DIP (0.300, 7.62mm) package, this driver IC is excellent for driving common LEDs.This receiver is mounted in the Tube package.The Transceiver can transceiver type enables this part to be used in a wide range of applications.PCBs or development boards with Through Hole-types can accommodate this wide receiver.A power supply of 4.75V~5.25V is used by this differential driver.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.5V is the supply voltage range that this line driver ic can efficiently operate with.The integrated terminations of this wide receiver allow it to drive and receive signals from data.A package consisting of 8 market standard pinouts is provided with this integrated circuit.MAX487 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.This is a 8-pin driver IC with enhanced power dissipation control.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.There is typically a resolution of 1 bits specified with this receiver.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.There is one driver IC in this package which is intended to be operated by 5V of power.Ensure that the VCC pin of the ic receiver receives sufficient but not more than 0.4mA of input current.
MAX487EEPA+ Features
Tube package
8 pin count
8 pins
5V power supply
MAX487EEPA+ Applications
There are a lot of Maxim Integrated MAX487EEPA+ Drivers/Receivers/Transceivers applications.
- Desktop radio
- Tuner
- Vehicle
- Radio transmission
- LAN, SAN, WAN (local, storage, work area networks)
- Wireless access points
- Single to Multimode Fiber Conversion
- Cell phones
- Switches
- Gigabit Ethernet
