MAX488EESA+
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX488 |
| Pin Count | 8 |
| Output Voltage | 3V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 120μA |
| Propagation Delay | 250 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 70mV |
| Receive Delay-Max | 2000 ns |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 2000 ns |
| Output Low Current-Max | 0.004A |
| Number of Receivers | 1 |
| Height | 1.75mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
MAX488EESA+ Overview
This LED driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package for driving common LEDs.This receiver is mounted in the Tube package.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.In terms of power supply, this differential driver utilizes 4.75V~5.25V.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.IC receiver is designed for applications with a temperature of -40°C~85°C.This line driver ic can operate efficiently with a supply voltage range of 5V.In order to drive and receive signals from data, this wide receiver has 8 terminations integrated.ICs that are packaged with market standard pinouts are available on the market.The base part number MAX488 identifies the product type, temperature, package, etc., so you can search for more variants by using it.An enhanced power dissipation driver IC with 8 pins.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.It provided a 1-bit resolution capability with this ic receiver.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.There is a subcategory named Line Driver or Receivers for this rf transceiver module.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.There are 1 receivers inside.The device is capable of delivering voltage at the 3V axis.
MAX488EESA+ Features
Tube package
8 pin count
8 pins
5V power supply
MAX488EESA+ Applications
There are a lot of Maxim Integrated MAX488EESA+ Drivers/Receivers/Transceivers applications.
- Automation systems
- Radio transmission
- Servers
- Satellite radio receiver
- Mainframes, workstations or storage devices
- Broadcast application
- Switching system
- Desktop radio
- Metro access rings
- Wireless HD Photography
