MAX488ESA+
| Parameters | |
|---|---|
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 506.605978mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX488 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Operating Supply Current | 250μA |
| Nominal Supply Current | 250μA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 70mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 2000 ns |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 2000 ns |
| Output Low Current-Max | 0.004A |
| High Level Input Current-Max | 0.000002A |
| Height | 1.5mm |
| Length | 5mm |
MAX488ESA+ Overview
This LED driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package for driving common LEDs.In the Tube package, this receiver is mounted.As a Transceiver can transceiver, this part has enabled many applications to be served.A Surface Mount-type PCB or development board can be used to place this wide receiver.This differential driver uses 4.75V~5.25V for power supply.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.IC receiver has been designed primarily for applications operating at -40°C~85°C.5V is the supply voltage range that this line driver ic can efficiently operate with.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.A package consisting of 8 market standard pinouts is provided with this integrated circuit.For more variants of this part, try searching with the base part number MAX488, which indicates the product type, temperature, package, etc.The driver IC has improved power dissipation control.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.There are typically 1 bits of resolution specified in the specifications of this receiver.This transceiver module is designed to operate from an input voltage supply of 5V.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.There are 1 transceivers in total implemented by this IC.It is capable of driving LEDs with a voltage of 250μA as the input voltage to this integrating circuit.
MAX488ESA+ Features
Tube package
8 pin count
8 pins
5V power supply
MAX488ESA+ Applications
There are a lot of Maxim Integrated MAX488ESA+ Drivers/Receivers/Transceivers applications.
- Wireless projection application for conferences
- 1x/2x Fiber Channel
- Fiber optic cable connection network
- Satellite communication
- Telecom applications
- Wireless smart house
- Wireless network systems
- Home theater wiring-free
- Wireless teaching
- Wired telephone
