MAX4896ATP+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 3Ohm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.7W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX4896 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 960mA |
| Power Supplies | 3/5V |
| Interface | SPI |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 100μA |
| Output Configuration | Low Side |
| Output Current | 200mA |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Output Current per Channel | 410mA |
| Rise Time | 200ns |
| Fall Time (Typ) | 200 ns |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Rds On (Typ) | 3 Ω |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX4896ATP+ Overview
It is packaged in the manner of a Tube.It is included with the 20-WQFN Exposed Pad package as well.This LED driving board is mounted using the mounting type Surface Mount.It owns Relay, Solenoid Driver switch type.Keeping the temperature at -40°C~125°C TA ensures reliable operation.The lighting driver is equipped with 8 outputs that can be used.Voltage output is N-Channel volts at maximum.This LED driving board is equipped with Status Flag features in order for it to be useful.It belongs to the family MAX4896.A total of 20 terminations can be found in it.During operation, the 20 pins are used.There are 1 functions of the LED driver.Maximum output current falls to 960mA when operation criteria are met.It is possible to achieve a high level of efficiency with a supply voltage of 3.6V.This lighting driver is mounted in the way of Surface Mount.This LED driver is equipped with a total of 20 pins.3Ohm resistance is present in the lighting driver.In this case, the output current is set to 200mA.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.This part is powered by 3/5V.5.5VV is the maximum supply voltage it can handle.A supply voltage of 2.7VV is sufficient for it to work.
MAX4896ATP+ Features
Supplied from 3.6V
Resistance of 3Ohm
MAX4896ATP+ Applications
There are a lot of Maxim Integrated MAX4896ATP+ Power Switches ICs applications.
- Storage Drives
- USB3.1 Power Delivery
- Solid-State Drives
- Telecom and Network Systems
- Portable GPS Device
- USB Protection
- Hot-Swap Systems
- USB Ports/Hubs
- USB Power Distribution
- Wireless Headsets
