MAX4896ATP+T
| Parameters | |
|---|---|
| Rds On (Typ) | 3 Ω |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 3Ohm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.7W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4896 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 960mA |
| Power Supplies | 3/5V |
| Interface | SPI |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Output Current | 200mA |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Output Current per Channel | 410mA |
| Rise Time | 200ns |
| Fall Time (Typ) | 200 ns |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
MAX4896ATP+T Overview
Tape & Reel (TR) is how it's packaged.This file is included in package 20-WQFN Exposed Pad.A Surface Mount mounting is used for the LED driving board.A Relay, Solenoid Driver switch type is owned by it.To ensure reliable operation, the temperature should be set to -40°C~125°C TA.There are 8 outputs available on this lighting driver.It has a maximum output voltage of N-Channel volts.Features of the lighting driver are Status Flag.It belongs to the MAX4896 family.There are 20 terminations in it.For operation, 20 pins are used.It has 1 functions.In order to meet the operation criteria, the maximum output current drops to 960mA.The supply voltage can be 3.6V for high efficiency.As a result, it is mounted in the manner of Surface Mount.A total of 20 pins are present on it.Currently, the LED driving board has a resistance of 3Ohm ohms.It is set to 200mA in this case.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.In this case, the power supply is 3/5V.It can handle a voltage of 5.5VV as its maximum supply voltage.It can work with as low a supply voltage as feasible, such as 2.7VV.
MAX4896ATP+T Features
Supplied from 3.6V
Resistance of 3Ohm
MAX4896ATP+T Applications
There are a lot of Maxim Integrated MAX4896ATP+T Power Switches ICs applications.
- Solid State Drivers
- PDAs
- Portable Video Game Players
- Gaming
- PC Cards
- Various applications equipped with buttons
- Low Voltage I/O System Power
- HDD, SSD
- Hot Swap
- Portable/Handheld Devices
